行业动态【ENTERPRISE NEWS】

当前位置:网站宾利公众号系统 > 新闻资讯 > 行业动态
  • 保养轻质隔墙板的方法有哪些?
  • 本站编辑:杭州久泰建材宾利公众号系统发布日期:2019-03-18 13:46 浏览次数:
影响轻质隔墙板质量的因素有很多,除了生产和安装施工环节外,养护阶段的科学管理同样不可忽视。有的墙材企业在生产中能把各项工作做到位,技术上也没有问题,可由于对产品的养护没有形成一套严格有效的管理制度,结果造成原本合格的产品出现了问题,这种现象是一定要避免的。下面就说一下轻质隔墙板养护的主要措施。 
    1、存放的环境要适宜。轻质墙板在生产后要经历一段时间的养护期,养护期一般不少于20天。养护阶段对存放环境的温度和湿度都有一定的要求,不能随意存放。例如,存放环境如果温度过低,水泥等浆料就难以达到合格的强度,造成整个墙板的强度降低;如果放置在烈日下,则会使轻质墙板的两面硬化的速度不一致,造成板面的弯曲;在雨季,湿度过大的地区,则要适当延长养护期,使轻质隔墙板有足够的干燥时间等等。 
    2、轻质隔墙板要正确码放。不管什么样的墙板产品,在脱模后往往处于浆
料的初凝状态,此时板体具有了一定的强度,但距离达到使用强度还有不少差距,因此一定要将墙板码放在平整的地方,否则板体极易出现变形,影响平整度。码放一般采取码垛的方式,根据不同产品,一般每垛可堆至2-3米高。为今后出货方便,还要在垛的底部事先放置托盘,要确保托盘本身的质量和放置的平整度,避免受力不均而出现轻质墙板的弯曲。 
此外,在养护期内,不要频繁搬运墙板,避免外力的影响造成产品的损坏,如果必须挪动、搬运,要尽可能利用叉车、地牛、堆高机等工具,不要采取人工搬运的方式。 
 如果您有关于轻质隔板墙的需求,或是想了解更多的关于轻质隔板墙的信息,详情请点击 咨询
杭州久泰建材宾利公众号系统是一家从事建筑装饰材料研究、开发、生产、应用为一体的厂家。


There are many factors that affect the quality of light partition board. Apart from production and installation, scientific management in the maintenance phase cannot be ignored. Some wall material enterprises can do all kinds of work well in production and have no technical problems. However, due to the lack of a strict and effective management system for product maintenance, problems have arisen in the originally qualified products. This phenomenon must be avoided. The following are the main measures for the maintenance of light partition boards.  
 
1. The storage environment should be suitable. Lightweight wallboard will undergo a curing period of not less than 20 days after production. The maintenance phase has certain requirements on the temperature and humidity of the storage environment and cannot be stored at will. For example, if the storage environment is too low in temperature, it is difficult for cement and other slurries to reach acceptable strength, resulting in a decrease in the strength of the entire wall panel; If placed in the hot sun, the two sides of the light wallboard will harden at different speeds, resulting in bending of the panel. In rainy season, in areas with excessive humidity, the curing period should be appropriately extended to allow sufficient drying time for light partition boards, etc.  
2. Lightweight partition boards shall be correctly stacked. No matter what kind of wallboard product, it is often in slurry after demoulding.
In the initial setting state of the material, the plate body has a certain strength at this time, but there is still a lot of gap to reach the use strength. Therefore, the wall plate must be stacked in a flat place, otherwise the plate body is easily deformed, affecting the flatness. Stacking is generally adopted. According to different products, each stack can be stacked to 2-3 meters high. For the convenience of shipping in the future, a tray should be placed at the bottom of the stack in advance to ensure the quality of the tray itself and the flatness of the placement, and to avoid bending of light wallboard due to uneven stress.  
In addition, during the curing period, do not frequently carry wallboard to avoid damage of products caused by external force. If it is necessary to move and carry, use forklift, ground cattle, stacker and other tools as much as possible, and do not use manual handling.  
 
If you have any need for light partition wall, or want to know more about light partition wall, please click for details.
Hangzhou Jiutai Building Materials Co., Ltd. is a manufacturer engaged in research, development, production and application of building decoration materials.